Planner

Huntersville, United States

Job Reference 1250602

Location Huntersville, United States

Industry Power - Nuclear

Function Planning / Scheduling

Job Type Contract

Date Added October 31, 2024

One of our major nuclear clients is seeking a Planner to work on an 12- month assignment in their facilities in Huntersville, NC.

Summary:

This position is responsible for developing maintenance work documents, administrative controls, specific work instructions, and post-maintenance test requirements to provide instructions to plant personnel to ensure the safe and efficient operation of the unit, performance of troubleshooting activities and corrective maintenance in accordance with AD-MN-ALL-0005, UFSAR, technical specifications, vendor recommendations, and environmental compliance guidelines. This position is responsible for preparing and updating work packages to resolve condition reports, routine activities, reported deficiencies, or enhancements to ensure completion within the established deadlines and schedules.

Job Responsibilities:
 
  • Validates identified component and plant discrepancies identified on work requests.
  • Converts Work Requests (WR) to Work Orders (WO), walks down jobs to identify needed support information.
  • Develops work order tasks for support groups, Post Maintenance Testing (PMT), and provides work instructions.
  • Identifies man-hours for craft corrective and preventative maintenance work packages to meet the "Online" and "Outage" scheduling requirements for the maintenance department.
  • Defines procedures, drawings, equipment and materials required to perform work packages.
  • Facilitates package preparation by identifying isolation requirements (if required), scaffold, temporary power tasks, etc.
  • Verifies work instructions are adequate and comply with all applicable station procedures.
  • Reviews and plans work order instructions for EC's (Engineering Changes).
  • Identifies and request corrections and revisions to the Equipment Data Base, Bill of Materials, Drawings, and Plant Procedures
  • Is responsible for the processing of Preventive Maintenance Revision (PMR) PM change assignments requests that are submitted for changes to existing PM's and creation of new PM's.

Requirement:
  • High School diploma or equivalent
  • 3 years of work-related experience
Desired Qualifications:
  • 2 years technical degree in Mechanical Specialties (Valves, HVAC, Pumps etc)
  • Experience with Microsoft Office Products
  • 5 years of experience in nuclear maintenance experience or 10 years of experience in a nuclear plant.

Related Jobs

Employment Type Contract 23 Oct 2024 Date Published
Location Covert, Michigan, United States
Senior Reactor Operator (PWR)
Airswift is looking for Senior Reactor Operators (SROs) to work on a major ...
Airswift is looking for Senior Reactor Operators (SROs) to work on a major Nuclear project in Pasalides - MI, on a 2+ years assignment.

It is necessary to have licensed and experience with Pressurized Water Reactors (PWRs).
 
These SROs should also have experience with work control clearance tagging, which involves ensuring safety protocols when systems or equipment are taken offline or put back into operation.
 
The candidates should have at least five years of experience working in a role outside of an active reactor operator position (out of class).
Apply Now
Employment Type Contract 1 Nov 2024 Date Published
Location surry, Virginia, United States
Instrumentation and Controls engineer
Currently seeking a Senior Instrumentation and Controls Engineer with 10+ years ...
Currently seeking a Senior Instrumentation and Controls Engineer with 10+ years of experience in the nuclear field. 

Job summary: 
Will assist in preparing and reviewing engineering and design drawings, change packages. calculations and overall technical evaluations. 
Will provide onsite technical support and oversight for testing acceptance and simulation walkthroughs to ensure proper procedures. 
Will Support the design and system upgrades from construction phase through the implementation phase. 

Top skills needed: 
Must have up to date LMS and Qual card with ENG-001 design qualifications
Must have a strong background in Electrical or I&C engineering 
Must have an up-to-date Design Qualification from most recent nuclear company
Must hold a 50.59 
Must be familiar with Disturbed Control Systems or Programmable Logic Control systems. 
No degree is required if overall years of experience is met within the nuclear I&C field. 


 
Apply Now
Employment Type Contract 7 Oct 2024 Date Published
Location Richland, Washington, United States
Senior Implementation Manager
Airswift is looking for an Implementation Manager to work for a major client in ...
Airswift is looking for an Implementation Manager to work for a major client in Richland, Washington for a short-term assignment likely to be extended.
The Mission Critical Implementation Specialist (MCIS) provides technical and support services (and in some instances direct oversight and governance services) to Enterprise Risk Projects at the company, that will ultimately allow the Project Manager to execute project deliverables with quality, safety, on schedule, within budget, and in the most effective manner possible.

Description:
  • Iterative review of key project documentation with the intent to identify, where appropriate, strategies can be refined and/or resources can be applied to improve schedule performance, result in better quality, and/or result in a more efficient use of resources. Throughout the process of these iterative reviews, identify errors or general misconceptions that need to be corrected for successful project implementation. Key project documentation includes, but is not limited to: Project Schedule (both work management and project lifecycle schedules) Implementation Means & Methods (both EN and Vendor) Risk Register, Work Orders & Associated Documentation (weld records, ASME Section XI repair and replacement plans, field sketches, etc.)
  • Quality Control Inspections & Hold Points, Test & Commissioning Plans, Clearance Orders & Turnover Strategy, Materials, Tools & Specialty Tooling, Resource Load Boards (including mobilization and demobilization strategy). Budget / Estimate (specifically surrounding assumptions, constraints, unit rates, wage rates, etc.)
  • Radiological Strategies (balance between contamination controls and consideration for work scope [ex: conservative need for respirators while welding vs the quality of welding as a result], decontamination strategies, etc.), Rigging / Material Handling Plans Technical – Responsible for validating the quality of all Work Order Tasks (WOT) associated with assigned scope prior to field activities and IAW Columbia work management processes (both on-line and outage).
  • Responsible for the remediation of identified WOTs that lack quality, contain incorrect references, introduce error traps, and/or contain poorly written instructions.
  • Responsible for reviewing, commenting, and providing improvements to testing and/or acceptance plans (factory, shop, site, mock-up, post modification, etc.). Responsible for identifying activities and/or processes that would benefit from a mock-up.
  • Responsible for providing input and guidance on making said mock-ups effective and impactful.
  • Responsible for communicating personal Operating Experience and identifying industry and/or similar Operating Experiences associated with project activities.
  • Responsible for developing response strategies that should be considered for each Operating Experience example
  • As needed, serve as the ASME PIC for Section XI Repair & Replacement Plan work scope.
  • Responsible for maintaining broad knowledge base of associated codes, standards, innovative technologies, technical skillsets (ex: welding, rigging, soldering, etc.), implementation strategies (ex: crew placement, turnovers, etc.), and general industry trends as related to the Enterprise Risk Projects being supported.
  • Oversight – Responsible for providing timely and candid feedback to the Project Manager(s), Oversight Manager(s), and Department Management on all aspects of a project strategy, implementation plan, or any other facet that supports successful execution of a project.
  • As needed, provide oversight of shop or field activities, ensuring activities are progressing against the approved project strategy, providing coaching as needed to preclude changes in the plan.
  • As needed, serve as the designated person in charge of project activities on the shift opposite of the Project Manager. Such instances may require oversight of crews greater than 50 individuals.
  • Coordinate resources and collaborate with vendor resources to ensure roadblocks are identified and removed.
  • As needed, attend (in-person), key strategy meetings with the Project Manager. Example meetings could include, but are not limited, the following: Design Review Boards, Steering Committees, Integrated Implementation Briefings, High Risk Work Plan Challenge Meetings, Project Readiness/Challenge Meetings, Schedule Development Meetings, Risk Management Meetings, and others as assigned.
Education:
  • Requires an advanced (graduate) degree in a related field of study or business AND 10 years of mechanical experience in a nuclear, steam-cycle, and/or regulated industrial environment.OR;
  • Requires a bachelor’s degree in a related field of study or business AND 12 years of mechanical experience in a nuclear, steam-cycle, and/or regulated industrial environment. OR;
  • Requires an associate’s degree from an accredited college or university AND 14 years of mechanical experience in a nuclear, steam-cycle, and/or regulated industrial environment. OR.
  • Requires a High School Diploma/GED AND 16 years of mechanical experience in a nuclear, steam-cycle, and/or regulated industrial environment.
Desired Experience:
  • Proven experience in construction management.
  • Proven experience in multiple refueling outages at a commercial nuclear powerplant.
  • Proven experience with the production and operational processes at a commercial nuclear powerplant.
  • Proven experience with feedwater heaters and internals of feedwater heaters.
  • Proven experience with steam systems and/or work associated with ASME Boiler Pressure Vessel code vessels, heat exchangers, piping, and valves.
  • Certifications associated with mechanical disciplines, construction, or projects are desired.
Required abilities and skills:
  • Skilled in Enterprise Management Software (Asset Suite, SAP, etc.)
  • Intimately familiar with logic driven schedules (generated by Primavera and/or Microsoft Project)
  • Code and regulatory requirements as they relate to maintenance and field work activities
  • Error reduction and human performance improvement methods, and cost-effective work execution methodologies.
  • Procedures and processes related to maintenance and engineering activities
  • Strong problem solving and analytical skills
  • Advanced Computer Skills
Apply Now

Don’t see a job for you? Register for our candidate portal

Sign in or register for Airswift Digital to stay updated with recommended jobs.

Visit our candidate portal