Airswift, an international workforce solutions provider within the energy, process and infrastructure industries, has been tasked with hiring a long-term capital project engineer for our chemical company client located in Lake Charles, LA. 

The Project Engineer will be primarily responsible for engineering, overseeing, and executing multiple capital & expense projects to meet scope, cost, and schedule requirements at the site.

DUTIES AND RESPONSIBILITIES
May include, but are not limited to, the following:

• Demonstrate strong commitment to health, safety, and environmental requirements through personal behavior and direction of others.
• Provide required engineering services and technical knowledge for the application of new or different processes, equipment, and materials in existing production units to improve production rates, quality, lower production cost, and/or improve equipment reliability.
• Develop plans for projects and prepare budget estimates for approvals.
• Coordinate contract engineering services for projects in accordance with good engineering and safety practices, governmental regulations, plant specifications, applicable codes and underwriter requirements.
• Develop and/or update engineering procedures in order to ensure optimum engineering support for plant facilities.
• Initiate procurement of materials and communicate with Purchasing, Vendors, and Stores to control expediting and receiving of material.
• Prepare work scope descriptions and bid specifications for Purchasing to request bids from vendors and contractors.
• Review and approve construction drawings, vendor equipment, vessels, and machinery related to industrial processes.
• Review and provide recommendations on engineering and construction bid packages.
• Coordinate field installation, inspect, and accept work.
• Prepare project status, construction progress, and cost forecast reports required to keep management informed of progress on assigned projects.
• Communicate with Maintenance and Production personnel to acquire design feedback experience on previously installed equipment and material.
• Fully support Company goals of continuous improvement and operational excellence at strategic and tactical levels including reviewing area of responsibility for improvement opportunities to initiate projects or communicate ideas to management.

• B.S. Degree in Engineering (Mechanical, Chemical, Civil or Electrical) PREFERRED but not required
• Minimum of 5-10 years of experience in a chemical/petrochemical plant or related industry in the engineering field.
• Active TWIC required.
• 2+ years of project engineering experience.
• Experience leading capital projects: budgeting, forecasting, administration of schedule, and cost control.
• Ability to read and interpret P&IDs, ACAD drawings, and equipment literature applicable in a chemical facility.
• Previous experience with SAP is preferred.
• Strong in Microsoft Office Suite, including Excel.

• Provide technical solutions for operational engineering challenges.
• Evaluate manufacturers for technical competence and compliance.
• Conduct technical studies and prepare reports for management and technical teams.
• Review engineering proposals for large projects.
• Develop and review engineering documentation (procedures, standards, specifications).
• Lead HAZOP/SIL assignments; knowledgeable in IEC 61511.
• Collaborate with design engineers, operations, and other internal teams.
• Liaise with clients, suppliers, contractors, and authorities.

• BSc in Electrical/Instrumentation or relevant engineering field.
• Extensive experience in instrumentation/control engineering (oil, gas, petrochemical).
• Experience in FEED projects and plant construction/commissioning.
• In-depth knowledge of instrumentation (flow, level, pressure, temperature).
• Familiarity with boiler, heater, and furnace control.
• Knowledge of materials selection and electrical systems for instrumentation.
• Expertise in national/international standards (ISA, ANSI, ASME, API, IEC).
• Experience with DCS/ESD systems, Foundation Fieldbus, and vendor PCS/FAT.
• Proficient in office and technical software.

Elevate Your Career as Lab Technician with Airswift

One of our clients is seeking a Lab Technician to work full-time in Wonowan, British Columbia, Canada from 01-Dec-2024 to 30-Nov-2025. Join us and use your skills in decision-making tools, productivity, and decision support systems to improve our work processes and efficiencies.

• Identify and develop work process improvements and efficiencies for maintenance processes.
• Execute maintenance and repair of general equipment according to established procedures and guidelines.
• Ensure productivity, quality, safety, and environmental standards are met.
• Complete all work in line with best practice guidelines from Discipline Specialists.
• Facilitate teamwork and knowledge transfer between the area and specialist groups.
• Coach Technicians and assist in developing training plans.
• Maintain the highest safety and environmental standards during maintenance activities.
• Understand plant and instrument diagrams.

• Intermediate level with 3-5 years of experience.
• Provide technical/functional and/or administrative support.
• General working knowledge of the department's specific systems, terminology, and procedures.
• Able to solve problems and make basic decisions.

• Bachelor's degree in a related field or equivalent experience preferred.
• Experience with decision making tools, productivity, and decision support systems.
• Optional: Experience with maintenance and repair, work process improvements, efficiencies, productivity, quality, safety, environmental standards, and plant & instrument diagrams.

Unlock your potential with Airswift. Apply now!

Are you a seasoned Lead Electrical Engineer looking for a new challenge? Do you have project experience working on FEED projects? Join our team at Airswift and be a part of delivering excellence in every project. We are the world's engineers, the company that makes the world a better place, the company that delivers the change the world needs most, and the company that doesn’t just talk sustainability but makes it real for our clients and ourselves – because our ideas, our expertise, and our ability to scale solutions enables us to transform the world.

Role Overview

• Review design packages for electrical systems and equipment (i.e., Power & Distribution Transformers, motors, generators, high voltage/low voltage switchgear / Motor Control Center (MCC), distribution network, control equipment, power outlets etc.) including drawings, datasheets, detail scope of work, calculations, Bill of Material / Quantity and preliminary cost estimates, Hazardous Area Classification and power System Study
• Prepare the Project Design Basis Document as per the project scope
• Prepare the entire project load lists based on the project scope
• Produce technical reports for the scope of work, and technical specifications for specific electrical equipment
• Assist in the electrical activities of engineering, procurement, and eventual construction (EPC) contractors during the Front-End Engineering Development (FEED) and design phase
• Coordinate with Project managers to finalize the Electrical Engineering scope for the entire project / package
• Carry out analysis of major equipment selected in the design package
• Review and respond to technical and site queries
• Experience in project execution in accordance with client’s and worldwide industrial standards
• Monitor and review in coordination with client’s PMT the performance and work quality of the contractor
• Ensure that the design work by contractor is in accordance with client’s design standards, applicable codes/regulations, and acceptable work practices
• Assist the Project Managers and Project Engineers in evaluating Material Requisitions (MR), Technical Bid Evaluation (TBE) and Award Recommendation (AR) provided by Contractor and able to perform Procurement support
• Review and evaluate Change Orders to ensure full compliance with standards and that costs are in line with project budget
• Work closely with Engineering Teams during the project to ensure facility integrity in terms of HSE
• Provide technical assurance for electrical discipline deliverables for projects
• Recommend new improvement solutions for installations or modifications to improve existing facilities and standards
• Good knowledge on Power system automation

Skills & Qualifications

• Bachelor’s degree within the Electrical Engineering field or a BA in Science with a focus in Electrical Engineering
• Certified Engineer desirable
• Experience in design, engineering and construction
• Middle East project experience is preferable (Gas Plants, Refineries etc.)
• Engineer must be familiar with NEC, IEEE/ANSI, IEC and other International electrical standards, best practices and value practices
• Be fully familiar with analogue and Digital Control Systems including Power System Automation (PSA), DCS, PLC and SCADA controls
• Thorough knowledge of the English language is required to perform the necessary in-depth analysis and studies, make professional presentations and keep up with technical advancements
• Ideally have experience with Electrical Transient Analysis Program (ETAP) or similar software and all Microsoft office

Education & Experience

• Problem Solving: Advanced troubleshooting skills.
• Network Expertise: Experience in network storage, server solutions, and networking technologies.
• Remote Access Proficiency: Skilled in VPN and remote access technologies.
• Azure Experience: Proven management of Azure environments.
• Security Knowledge: Familiarity with anti-malware/security software and SOC 2 compliance.
• Technical Vision: Understanding of emerging technologies.
• ITIL Knowledge: Familiarity with ITIL best practices.
• Excellent Communication: Strong verbal and written communication skills for collaboration with a remote team.

Pay & Benefits

• Meaningful and interesting projects delivered to leaders of industry across the energy transition, emerging and conventional energy sectors
• A caring team culture: we support each other professionally and personally, encouraging knowledge sharing across all areas of the business
• Energy Transition Academy: join a community of experts sharing your knowledge and gaining more exposure to a variety of existing and emerging energy systems – delivered by experts in their field
• Flexible working arrangements that balance client, team and individual needs offering hybrid and remote working where relevant
• Commitment to Diversity and Inclusion; we are an organisation actively committed to diversity and inclusion across our business
• Competitive remuneration package with regular reviews to ensure we are rewarding at the right level in line with the market
• Flexible benefits package inclusive of 33 days annual leave (including public holidays),plus the potential for one additional ‘flex day’ per month. Further benefits include a generous contributory pension scheme, private medical cover, 4x base salary life insurance; all of these and more that can be adapted to suit your own lifestyle
• Commitment to continued professional development; development plans that are tailored to your individual needs and interests
• Global connections; join experts around the world who are at the leading edge of our industry, shaping the standards of our profession

Unlock your potential with Airswift. Apply now!

Airswift is a global workforce solutions provider specializing in the engineering and technology sectors. With operations spanning over 70 countries, we boast a talent pool of over 9,000 contractors and 1,000 employees. Our unparalleled reach and expertise are unmatched in the industry. Learn more about Airswift at https://www.airswift.com/blog.

Airswift is working with one of our major clients in the Oil & Gas industry to find a Sourcing Specialist to join their team in Calgary, Edmonton or Toronto, on a 3-6 months contract position.

Sourcing Specialist who will be responsible for developing, deploying, and managing the strategic and complex procurement for Technology and Information Services (TIS) commodities and services required to support company operations.

As well as being involved in complex sourcing of these TIS commodities and services, you are also primarily responsible for the strategic sourcing and category management related to multi-year/multi-million-dollar contract negotiations with TIS marketplace and niche vendors. The goal is to maximize value to the Enterprise by procuring quality, fit for purpose commodities and services at the lowest total cost of ownership.

What you will do:

• Oversee Technology and Information Services (TIS) support by ensuring category goals and objectives are translated into strategies that are aligned to achieve both short- and long-term objectives of the stakeholder group and broader enterprise.

• Applies a broad and deep subject matter expertise in the technology and information services market dynamics, and industry trends impacting Company to support the development of appropriate sourcing strategies.

• Executes complex sourcing following the agreed processes and sourcing channels. Utilizes market analysis, benchmarking and contracting strategies for IT commodities and services. Works with cross-functional teams in assessing risks, options, and desired outcomes to meet TIS needs and technical compliance.

• Tracks and measures performance levels for complex sourcing and supplier effectiveness. Maintains focus on fit for purpose, added value, lowest total “life cycle” cost and cost savings.

• Maintains relationships with key IT, business and manufacturing partners and key supplier contacts.

• Develops and implements supplier continuous improvement initiatives.

Who you are:

• University degree in Finance, Business, Economics, Engineering, or related field with 4-7 years of progressively responsible and related experience OR a combination of education and experience may be considered.

• Demonstrated ability to be innovative, take initiative, lead, and manage change.

• Proven interpersonal, communication, contracting, negotiation, and influencing skills.

• Experience in managing multi-discipline stakeholder engagement for effective teamwork.

Are you ready to take on the role of Principal Consultant / Chief Electrical Engineer for our client, a leading EPC company in the renewable energy and chemicals sector? As a full-time employee based in Reading, United Kingdom, you will have the opportunity to showcase your expertise in electrical engineering while working onsite at various project locations.

Role Overview

• Lead and oversee all aspects of electrical engineering projects, including design, installation, and troubleshooting.
• Collaborate with project management teams to ensure successful delivery of projects within budget and timeline constraints.
• Utilize design software and conduct circuit analysis to develop efficient and cost-effective solutions.
• Provide technical guidance and support to junior engineers and team members.
• Troubleshoot and resolve any issues that arise during project execution.
• Ensure compliance with all relevant safety and industry standards.
• Conduct regular site visits to monitor progress and address any concerns.
• Communicate with clients and stakeholders to understand project requirements and provide updates on progress.
• Stay up-to-date with industry developments and advancements in electrical engineering.

Skills & Qualifications

• Extensive experience in EPC projects, preferably in the renewable energy or chemicals sector.
• Strong knowledge of electrical engineering principles and practices.
• Proficiency in project management and ability to lead a team.
• Expertise in design software and circuit analysis.
• Excellent troubleshooting skills and ability to think critically.
• Familiarity with relevant safety and industry standards.
• Ability to work onsite at project locations as needed.

Education & Experience

• Bachelor's degree in Electrical Engineering or related field.
• Professional certification in Electrical Engineering preferred.
• Minimum of 10 years of experience in electrical engineering, with at least 5 years in a leadership role.

Pay & Benefits

• Competitive salary based on qualifications and experience.
• Full-time permanent position with opportunities for growth and advancement.
• Comprehensive benefits package including health, dental, and vision insurance.
• Paid time off and holidays.
• Opportunity to work on exciting projects in the renewable energy and chemicals sector.

Unlock your potential with Airswift. Apply now!

Airswift is a global workforce solutions provider specializing in the engineering and technology sectors. With operations spanning over 70 countries, we boast a talent pool of over 9,000 contractors and 1,000 employees. Our unparalleled reach and expertise are unmatched in the industry. Learn more about Airswift at https://www.airswift.com/blog.

Role:  IT Project Manager - Corporate
Location: Monaco, Switzerland
Duration: 12 months (renewable)

Key Words: PMP, Scrum, Fluent in English, Oil and Gas

JOB PURPOSE:
As an IT Project Manager (Contractor), you oversee the planning, execution, and completion of IT projects. Manage project timelines, budgets, and resources, ensuring alignment with business goals. Collaborate with stakeholders and teams to deliver successful project outcomes.

RESPONSIBILITIES:

• Lead and manage multiple IT projects from initiation to completion, ensuring projects are delivered on time, within scope, and within budget.
• Develop comprehensive project plans, including timelines, milestones, resource allocation, and risk management strategies.
• Coordinate cross-functional project teams, ensuring effective communication and collaboration among team members.
• Define project objectives, scope, and deliverables in alignment with business goals and customer requirements.
• Monitor project progress, track key performance indicators (KPIs), and prepare regular status reports for stakeholders.
• Identify and mitigate project risks, resolving issues promptly to ensure project success.
• Manage project budgets, ensuring efficient use of resources and adherence to financial constraints.
• Conduct project meetings, including kick-off meetings, progress updates, and post-implementation reviews.
• Ensure compliance with industry standards, regulatory requirements, and organizational policies throughout the project lifecycle.
• Provide leadership and guidance to project team members, fostering a culture of continuous improvement and professional growth.
• Collaborate with stakeholders to gather requirements, define project scope, and establish clear project goals and objectives.
• Implement best practices in project management methodologies, such as Agile, Waterfall, or hybrid approaches, to optimize project execution.
• Oversee the procurement and deployment of necessary project resources, including software, hardware, and third-party services.
• Manage change requests and ensure that all changes are thoroughly documented, assessed, and approved before implementation.
• Ensure the delivery of high-quality project outcomes, meeting or exceeding customer expectations.

• Bachelor’s degree in computer science, information technology, business administration, or a related field is required.
• Certifications such as PMP (Project Management Professional), PRINCE2, or Certified ScrumMaster (CSM) demonstrate expertise in project management practices.
• Master’s Degree: A master’s degree in project management, business administration, or a related field is preferred but not mandatory.

• Minimum of 10 years of experience in IT project management, with a proven track record of successfully managing complex IT projects.
• At least 5 years of experience in a leadership or managerial role within IT project management.
• Strong technical background with hands-on experience in IT infrastructure, software development, and system integration projects.
• Demonstrated ability to develop and implement project management methodologies, best practices, and standards.
• Experience with project management tools and software, such as Microsoft Project, JIRA, or similar platforms.
• Proven experience in budget management, resource allocation, and financial oversight of IT projects.
  Strong leadership and team-building skills, with the ability to motivate and mentor project team members.
• Excellent communication and interpersonal skills, with the ability to liaise effectively with stakeholders at all levels of the organization.
• Relevant certifications such as PMP, PRINCE2, or Certified ScrumMaster (CSM) are preferred.
• Experience in risk management, change management, and quality assurance processes.

Role: IT Project Engineer - Corporate
Location: Monaco, Switzerland
Duration: 12 months (renewable)

Key Words: ITIL (IT Infrastructure Library), PMP, Fluent in English, Oil and Gas

JOB PURPOSE:
As an IT Project Engineer, you manage and execute IT projects from planning to completion. Ensure technical solutions meet business requirements, oversee project timelines and budgets, and collaborate with cross-functional teams to deliver successful IT implementations.

JOB RESPONSIBILITIES:

• Lead and participate in IT project development: Oversee the planning, design, and implementation of IT projects, ensuring alignment with organizational goals and objectives.
• Supervise technical teams: Provide leadership and guidance to project teams, ensuring tasks are completed on time and to the required standards.
• Coordinate with stakeholders: Collaborate with internal stakeholders, including product owners and UX designers, to ensure project requirements are accurately captured and met.
• Manage project timelines and budgets: Develop detailed project plans, monitor progress, and ensure projects are completed within allocated budgets and timelines.
• Implement best practices: Ensure adherence to IT project management best practices, including risk management, quality assurance, and change control processes.
• Conduct technical reviews: Perform code reviews, unit tests, and system integration tests to ensure high-quality deliverables.
• Mentor team members: Provide training and support to less experienced colleagues, fostering skill development and knowledge sharing within the team.
• Troubleshoot technical issues: Identify and resolve technical challenges encountered during project execution, ensuring minimal disruption to project timelines.

• Bachelor's degree in computer science, information technology, or a related field is required.
• Certifications such as ITIL (Information Technology Infrastructure Library), PMP (Project Management Professional), or AWS Certified Solutions Architect, demonstrating expertise in IT project management.
• Master's Degree in computer science, business administration, or a related field is preferred but not mandatory.
• Proficiency in English is essential for effective communication with team members, stakeholders, and external vendors.

• Minimum of 5 years of experience in IT project management, IT engineering, or a related field.
• Proven experience in managing and overseeing IT projects, including software development, infrastructure implementation, and system integration.
• Strong technical background with hands-on experience in designing, implementing, and managing complex IT projects, including cloud environments, cybersecurity, and enterprise applications.
• Demonstrated ability to develop and implement project management processes, best practices, and standards to ensure project success, on-time delivery, and compliance with industry standards.
• Experience with project management methodologies such as Agile, Scrum, and Waterfall.
  Proficiency in using project management tools to plan, monitor, track, and report on project progress, ensuring key milestones and deliverables are met.
• Strong leadership and team-building skills, with the ability to mentor and guide team members to achieve project goals.
• Excellent communication and interpersonal skills, with the ability to liaise effectively with stakeholders at all levels of the organization.
• Relevant certifications such as ITIL, PMP, or AWS Certified Solutions Architect are preferred.

• The Automation SIS Engineer is responsible for analysis and qualification of Safety Instrumented System (SIS) Safety Instrumented Functions (SIFs) as Independent Protection Layers (IPLs)
• This role involves data gathering and analysis of SIFs to ensure achieved Safety Integrity Level (SIL) meets the required performance level as defined in Process Hazard Analysis (PHA) Layers of Protection Analysis (LOPA) studies
• Qualification includes verifying design criteria and also ensuring inspection and test programs are in place to assure performance in operation

• Bachelor of Science degree in engineering (electrical, electronic, automation)
• Minimum 3-5 years’ experience in Instrumentation & Control and Automation field. SIS (safety instrumented system) experience is preferred
• Preferred qualifications include: Operating plant experience
• Good understanding of process plant equipment and processes
• Good instrumentation and control knowledge
• Thorough understanding of functional safety and safety integrity level concepts
• Excellent English written and spoken communication skills

• Job Type: Contract
• Work period: Full-Time
• Duration: 13-01-2025 TO 12-12-27
• Location: Immingham, United Kingdom
• Visa Sponsorship: Not Available

Elevate Your Career in Site Environmental Coordinator

Are you ready to join our team as a Site Environmental Coordinator and make a positive impact on the environment? As a key member of our organization, you will play a crucial role in implementing and maintaining our HSE management systems and ensuring compliance with environmental regulations. Join us and be a part of our mission to design, construct, and operate safe and sustainable infrastructure and plants for a better future.

Role Overview

• Promote awareness across the company organization on the HSE MS.
• Co-ordinate the implementation of the Environmental Management Plans at site during project execution phases according to the Company Environmental guidelines and standards.
• Ensure the management of Environmental issues for the site / field Promote environmental initiatives at site and project level.

Skills & Qualifications

• Strong knowledge of HSE, environmental compliance inspection, and environmental conformance & compliance.
• Experience with HSE management systems and ISO14001 compliance.
• Familiarity with environmental legislation monitoring and GHGs/climate change strategies.
• Knowledge of energy management and environmental permits management.
• Excellent communication and interpersonal skills for liaising with various departments and external parties.
• Ability to lead and develop training programs for personnel on environmental issues.
• Strong analytical skills for monitoring and reporting on the effectiveness of the HSE management system.
• Proven experience in managing environmental audits and implementing corrective actions.
• Understanding of emerging environmental technologies and ability to develop new initiatives.
• Bachelor's degree in Environmental Science, Engineering, or related field preferred.

Education & Experience

• Education: Bachelor's degree in Environmental Science, Engineering, or related field preferred.
• Certifications: Relevant certifications in HSE or environmental management advantageous.
• Experience: Minimum 3 years of experience in HSE management systems and environmental compliance.

Pay & Benefits

• Competitive salary based on qualifications and experience.
• Opportunity to work with a global leader in sustainable infrastructure and plant design.
• Full-time contract position with potential for extension.
• Work onsite at our Immingham location in the United Kingdom.

Unlock your potential with Airswift. Apply now!

About Airswift

Airswift is a global workforce solutions provider specializing in the engineering and technology sectors. With operations spanning over 70 countries, we boast a talent pool of over 9,000 contractors and 1,000 employees. Our unparalleled reach and expertise are unmatched in the industry. Learn more about Airswift at https://www.airswift.com/blog.

• Head the execution oversight and hook-up of the offshore COMP2 offshore workscope (inclusive of brownfield) in a safe and timely manner ensuring quality and integrity are delivered.
• To ensure the highest level of safety and compliance during execution.
• Responsible as the single point of contact between Offshore and Onshore COMP 2 PMT (as required supported by offshore Commissioning Head).

• Reports to HU&BF Div Manager. When CSR reports to either the delegated Manager (HU / Commissioning).
• Manage and oversee the COMP2  hook up, brownfield and shutdown scope of work including validation of execution with full compliance to project specifications and procedures.
• Manage the COMP2 execution Team offshore,
• Review, amend and endorse the contractor offshore daily progress report (DPR).
• Coordinate and participate in morning call with the Onshore PMT, update concerns and issues and identified support required.
• Provide input where required to the EPC Contractors execution strategy and procedures.
• Identify offshore risks and synergies to minimise impact to milestone dates and the RFSU dates
• Endorsement of offshore permits as required for execution.
• Interface with the Company Discipline Specialist and Project Management Team (PMT) to support site queries ensuring compliance with the project scope with emphasis on safety and reliability.
• Participate in workshops as required such as Schedule, Execution, Risk Assessments and HAZOP workshops.
• Represent project [CSR] in the offshore risk screening, PTW meetings and OIM meetings as required.
• Provide technical and execution reviews of the project execution related deliverables with respect to compliance to Company engineering standards, procedures, and best practices.
• Support project quality improvement in contractor’s execution by leveraging experience, good oilfield practises to ensure safety, quality, integrity and execution are delivered.
• Liaising with members of PMT (Business, Interface/Execution, Construction, Quality, and Safety) to ensure alignment on projects shutdown needs, objectives, and requirements.
• Ensure the implementation of the QELNG brownfield & shutdown work process, benchmarking and leveraging from the brownfield & shutdown best practices in QELNG and shareholders, identifying opportunities for improvement & synergy, to avoid production impact, and business interruption.
• Monitor and report on offshore KPIs for COMP2  in order to ensure best-in class performance are implemented and achieved.
• Participate and contribute participate in workshops as required such as Schedule, Execution, Risk Assessments and HAZOP workshops.

• Either Bachelors’ degree in Engineering discipline or Higher Education qualification plus suitable experience
• 15 years experience managing large Oil & Gas Hook-up and associated  scopes of work with 5 years at a senior level offshore with overall responsibility for Hook-up /Brownfield /Shutdown execution
• Broad and extensive knowledge of brownfield engineering design standards, specifications, codes and appropriate safety criteria
• Extensive knowledge of offshore facilities and structures construction and operations
• Broad knowledge of Brownfield projects administration

• Onshore production facilities (well sites, flow lines, gathering lines, metering stations, central flow manifolds)
• Oil/gas separation and processing, Gas sweetening, Acid-gas processing,Sulfur handling, storage, and shipping, LPG-product fractionation, storage, and shipping
• Crude-oil storage and shipping, Rail-loading facilities for all products
• Tengiz-area infrastructure including roads, warehousing and power supply
• New facilities for the treatment and disposal of low pH rain water comprising water collecting piping, collection / neutralization pond and evaporation ponds
• Review and approval of job packs and design deliverables to QA/QC submitted by the engineering contractors. Maintain and update Specifications & Standards in Civil/Structural discipline, as needed
• Provides technical support to Planning Group with regards to the cost estimate and project schedule, managing engineering and drafting works for civil/structural discipline
• Preparation/review of civil/structural job packages for the cap?tal projects, review and approval of job packs and design deliverables to QA/QC submitted by the engineering contractor
• Generally proceeds on own initiative and judgment, receiving general supervision with infrequent supplementary instructions
• Provide input to Project Engineers during early project development (CPDEP 1 & 2) phases, and participate in Project Planning, Scheduling and Estimates
• Specify and raise material requisitions for Purchasing of major/long lead structural, architectural, fireproofing materials, HDPE membranes and other bulk items
• Review and approve a list of project specific requirements and constraints for on land site development; review soil reports and studies for optimal site selection, geotechnical calculations for soil improvement and deep excavations method, and earth retaining structures
• Review and approve infrastructure design requirements; perform technical review for transportation (on land), loading/offloading and installation of vessels, columns, substations and structural modules
• Review and approve Heavy Lift methods and associated constructability issues and Safety considerations. Identify risk and develop mitigation plans
• Provide guidance on repairs, modifications and strengthening for exist?ng structures, consult with SME on special issues such as vibration design
• Review and approve specialty engineered scaffolding
• Fire protection; Review detailed fire and blast evaluation, and risk assessments, approve structural calculations
• Perform functional review of MOC documentation to ensure emergency response plans are in place
• Participate in safety incidents investigations and provide input as SME
• Ensure that all design packages comply with Specifications & ASME, API and other applicable national and international standards (should know SNIP, Eurocode and GOST standards)
• Ensure that materials used in the fabrication and construction complies with Specifications and requirements
• Provide technical support to site construction and Start-up / Commissioning groups. Provide technical solutions to problems at construction site
• Provide engineering input and engineering support to out-source engineering companies during the execution of projects. Review and approve out-sourced engineering company submittals to ensure conformity to Standards and Specifications and contract terms
• Responsible for leading and deployment of engineering work processes, the guidelines, the policies and standards that will ensure the quality of the work product, its efficiency of design and the cost awareness during design and project execution
• Participate in technical evaluation of bids received and the selection of suitable contractor for executing projects, relates design requirements to alternative specifications and standards considering project cost, operations efficiency, maintenance costs and energy conservation
• Responsible for providing technical input, reports and discussion to major capital projects, site technical review bodies or committees

• Higher technical education in Civil Engineering (master’s degree in respective area is preferable)
• 5+ years applicable experience in the industrial building (oil & gas industry is preferable)
• English language proficiency (speak/read/write) of Intermediate Level or higher is required
• Proficiency in using of STAAD Pro, MS Office Programs (Word, Excel, Powerpoint) is required
• Must show experience and maturity in leading the Project Team to accomplish all the Specific Work Responsibilities listed herein in a timely manner, and in working with all the groups and organizations listed above. Timely communications with the Project Team and all Stakeholders is essential to a successful project

• Ensures effective implementation of the Company Project Management Systems (PMS) through the Project Quality Plan and Quality Processes.
• Ensure through Quality monitoring and measurement the implementation of QGPMS & EPCI contract quality requirements, leading quality audit programs, quality surveillance and quality control programs.
• Develops, implements and reports installation and hook-up phase quality surveillance program.
• Providing continuous support, coordination and advice to the NFXP Offshore Head of QA/QC Topsides on quality issues concerning PMT discipline execution and the oversight of contractors. 
• Develop necessary quality procedures, plans, work Instructions and provides quality advice and guidance to the NFXP Offshore team PMT.
• Head of QA/QC Topsides.

• Counsels on the Implementation of the quality management system and coordinates in providing quality planning input for the PMT; Monitors quality management system effectiveness.
• Prepares and executes/leads under the direction of the Head of QA/QC Topsides PMT internal and external audit schedule including stewardship of audit findings to resolution and closure using an “Action Tracking” close out process.
• Prepares and leads quality surveillance programs for installation and hook-up phases.
• Coordinates subordinate QG QA/QC team in daily planning and execution of their Quality function and duties including verification of all inspections and tests (i.e., Via ITP’s), production and follow up of daily quality reports, quality deficiencies and quality tools.
• Counsels the development of quality alerts, quality deficiencies and NCRs as necessary and stewards to close out. Monitors and reports quality KPIs to measure and improve quality performance.
• Attends internal and external quality meetings, facilitating quality planning, progress, deliverable and action, comment and finding close out.
• Implements reviews and stewards quality deviations to specifications, equipment and approved plans/procedures ensuring they are subject to appropriate review and approval by QG SME. 
• Coordinates interfaces within PMT and towards EPCI to ensure a consistent, and effective quality approach is applied across the NFXP Offshore Project.
• Review and evaluates EPCI Deliverables for quality including specifications, plans and reports.  Prepares and gains approval of weekly and monthly quality reports.  Monitors and measures contractors’ quality performance, provides, and distributes quality surveillance metrics as described in the QMS control procedures
• Counsels the contractor to promote compliance; verify compliance with the contract and fitness for purpose of the delivered processes installation and hook-up processes. Actively participates in project lessons learned process, facilitating capturing and closure.  

• Bachelor’s degree in engineering or similar.
• CSWIP Senior Welding Inspection 3.2.1.
• Certified ISO 9001:2015 Lead Auditor.
• ISO 9712/ NACE NDE-Coating Qualifications.
• BOSIET/T-BOSIET and associated Offshore courses. 
• Offshore Medical 

• Professional Quality Engineer with 10 years of QA/QC experience in installation and hook-up of Offshore Oil & Gas Projects representing Clients.
• More than 8 years’ experience facilitating, coordinating and supervising implementation of quality control programs on Major EPCI offshore installation and hook-up Projects representing the Client.
• More than 8 years’ experience in the development and delivery of external & internal audit programs along with quality surveillance programs.
• 5 Years’ experience working in the Middle East Offshore as QA/QC Lead.
• Experience with EPC contractors, sub-contractors and vendors involved in the oil and gas industry.
• Demonstrated ability and sensitivity to work with people from a variety of cultural background.

Airswift is an international workforce solutions provider.  With 1000 employees and 9,000 contractors operating in over 70 countries, Airswift's geographical reach, experience and expertise across the energy, mining, infrastructure and technology sectors is unparalleled.

Position: E&I Coordinator

Location: Barrow Island

Roster: 14/14

Indicative Term of Contract: 12 months (casual)

Step into an Exciting Opportunity with Chevron on Barrow Island!

Chevron is seeking a skilled and motivated professional to join our team in a FIFO (Fly-In, Fly-Out) role at Barrow Island. This is your chance to be part of a global leader in the energy sector, contributing to impactful projects in a world-class operation.

This role will oversee the site construction execution activities for E&I, work scopes.

The role is responsible for Construction management activities including managing key stakeholders, internal & external interfaces, contractor oversight, and effectively managing a productive worksite. Activities such as the following:

Safety and Compliance:

• Uphold HES policies and attend all required HES meetings.
• Lead contractor safety management efforts; enforce safe work practices.
• Implement and manage CoW permit system during construction.
• Ensure compliance with contractor safety and quality programs.

Stakeholder and Contractor Oversight:

• Monitor contractor performance via daily reports, safety audits, and progress meetings.
• Work with contractors to define and communicate changes.
• Review and endorse contractors' resource loading and execution schedules.

Site and Operations Management:

• Collaborate with the Operations Science Analyst to maximize site productivity and resolve barriers.
• Provide constructability support to design teams and conduct pre-mobilization reviews.
• Review and align contractor SIMOPS Plan and Permit-to-Work systems.

Control of Work (CoW) Oversight:

• Identify and resolve gaps in CoW or Task Consequence Catalogue.
• Align PTW requirements with site execution plans.

Ready to make your mark on one of the most iconic projects in the energy sector? Apply today and bring your expertise to Barrow Island!

Only candidates with the right to work in Australia will be considered. (Australia Citizen, PR Holder, or Valid Australia working VISA)

If you are keen for this role, please apply directly to this ad with your CV & contact details, or email your CV to hassan.reza@airswift.com

• Ensuring the development and approval of digital transformation projects for the organization, coordinating the project progress, and facilitating collaboration among the company's structural units for the implementation of digital technologies and the principles of digital transformation
• Leading the development and execution of strategies, including budget approval, architecture formation, data and knowledge management processes, portfolio development of digital products (services, solutions), and establishing a corporate competency center for organizational digital transformation
• Providing leadership in managing changes related to the implementation of digital technologies across all areas of the organization’s activities, while ensuring the continuity of current operations and management systems
• Developing and implementing the organization's digital transformation strategy. Align digital technology capabilities with the organization’s strategic priorities
• Developing and implementing new business models
• Introducing modern digital technologies into the organization’s process and product activities. Developing and managing a portfolio of digital projects. An essential condition is ensuring centralized management of a diverse set of digital initiatives across the organization
• Transitioning to the management of the organization and production-technological processes based on operational digital data. Being a "driver" of digital innovation
• Ensuring the formation of a digital culture within the organization
• Developing and ensuring the implementation of digital technology projects across all company activities
• Exercising the authority of the head (or supervisor) of the project office (or other structural unit) for the development and implementation of projects or strategic planning documents in the field of digital transformation
• Establishing a competence center for digital transformation within the company

• Higher (postgraduate) degree in Information Technology, Information Systems and Technologies
• ITIL/COBIT Foundation (preferred)
• Work experience of more than 5 years
• Knowledge of data technologies and skills in working with data
• Basic knowledge of the subject area
• Knowledge of digital technology trends
• Knowledge of mathematical methods for data analysis
• Skills in planning, forecasting, and modeling
• Skills in designing, implementing, and operating IT systems
• Proficiency in organizational change management methodologies
• Project management skills
• Experience in creating divisions and project teams
• Experience in restructuring business processes
• Knowledge of regulatory frameworks
• Communication skills

Vacancy Overview

• BSc Degree in Science or Commercial field or its equivalent

• Troubleshoot various issues reported by the users in C&P and provide support.
• Facilitates the gathering of requirements, designing, implementing and supporting C&P tools to enhance the business functionality and performance.
• Active participation in all the business workshops of the implementation of new business processes, system upgrades and new tools implementation.
• Documentation of existing and To-Be business processes.
• Identify and document system gaps with business process and procedures in coordinating with C&P users and methods team.
• Work closely with the IT Team in the prioritization, testing, and deployment of system change requests and/or providing support.
• Documentation of the required reports for management.
• Analyze, scope and review C&P users system authorization roles periodically as per the SOD.
• Gathering and providing required information for the various corporate audits and assist in closing the audit findings.
• Execute system testing and provide guidance on user acceptance testing.
• Validate data and prepare reports as and when required for the C&P department.
• Be eager to continuously increase knowledge and skills through training programs and on-the-job learning.

• Proactively collaborate with teammates to anticipate and respond to issues that could impact solution delivery.
• Apply strong understanding of business and procurement processes, to deliver high quality projects and support C&P team in the successful adoption of the system.
• Provide induction, assistance and refreshers sessions on the use of C&P tools in all the entities of organization .
• Support users and answer to any question related to C&P Tools within organization .
• Assist C&P in any questions, maintenance actions and tools evolution needs in Procurement, Contracts in respect of general rules and procedures defined by organization and in coherence with other already existing/under implementation ERP tools.
• Advise and assist organization in defining solutions and developments related to C&P tools (SAP, e-sourcing, contract management, expediting…)
• Ensure the consistency of changes made on other SAP modules (link to other Business: Operations, Logistics, warehouse, Maintenance, Finance, Controlling, HR…) or external applications with C&P requirements by participating in activities and meetings affecting the functionality of all C&P tools.
• Monitor and report the progress of work related to C&P tools in organization .
• Contribute to maintain the internal knowledge of C&P tools for C&P and partner entities within organization by: Consolidating and documenting the experience, and know-how acquired in the performance of the duties.
• Ensure compliance in the use of C&P tools with all internal company rules (including organization   Code to conduct) and all applicable laws and regulation (JV rules, Country laws...)
• Be in constant alignment with H3SE Company rules, Procedures, Instructions and applicable legislation.
• Take the necessary measures to avert immediate threat of danger. Exercising caution as necessary to avoid danger to persons and installations

• Professional experience: > 4 years post-graduate experience in his/her field and the O&G industry. Minimum 1 year as Graduate Contracts and Procurement Engineer.
• Proficiency in Microsoft Office (expert in Microsoft Excel)
• Proficiency in oral and written English is required.
• Proficiency in communication skills.
• C&P competencies
• Intermediate level in SAP material management module. (Master data/Procurement/Inventory)

Vacancy Overview

• Responsible for preparation and follow-up of the Integration & hook-up activities to the works related to Ruya Project, including:
• Ensures proper co-ordination of all works to be carried out.
• Ensures that conflicting permits are brought to the attention of the Offshore CSR.
• Notify the SIMOPS Coordinator of any potential SIMOP's issues
• Is the focal point for all permits issued on the Site by MP.
• Ensure strong link is ensured between PTW preparation and HSE requirements.
• Ensure compliance with the PTW Originator and submission requirements.
• Provides a quality check of the permits, supporting documents and certificates prior to issue ensuring all the necessary signatures have been obtained.
• Perform Audit permit
• Participates to the PTW coordination daily meetings.
• Ensure on time submission and closure of PTW’s as per PTW procedure.
• Train all new personnel to E-COW
• Ensure coordination within the project completion team and experience transfer from/to other relevant projects
• provide KPI’s information for the reporting to the Offshore Company Site representative.
• provide daily & weekly reporting
• Liaise with Contractors/Subcontractors for all PTW subjects.
• ensure the Contractors/Subcontractors progress follow up and reporting
• participate to Lessons Learned for the Company.
• carry out any other duties or tasks that may be assigned by his hierarchical superiors into COMPANY’s organization.
• Establish positive working relationships with immediate supervision and personnel from other departments.

• Review all Brownfield fabrication activity performed at onshore to prepare WP/JC.
• Coordinate and review all job cards and work pack preparation and provide inputs to facilitate PTW on site.
• Plan and prepare all site work activity to ensure that all offshore works are performed in a safe and efficient manner.
• Review shutdown preparation tracker. 
• Review all constructability of Brownfield activity to make safe operation and reduce offshore activities.

Vacancy Overview

• Engineering degree/diploma or equivalent, however any qualification, technical or knowledge requirements may be waived through relevant work experience.

• Accountable for system completion and commissioning execution from preparation stage to final acceptance.
• Interfaces with various project teams and departments on resolving related issues that require effective communication, initiative, flexibility and an ability to induce collaboration
• Manage all Commissioning and system completion activities of the topside and pipeline (if any) scope, to ensure the technical objectives are safely met within the approved scope, budget and schedule.

• Min 10+ years of total experiences with at least 5 years demonstrated as commissioning lead/ manager experience in major capital projects.
• Experiences for manage onshore and ideally offshore oil and gas platform commissioning project from preparation stage, onshore/ offshore commissioning execution and provide support for start up and performance test of the offshore facility specially WHP topside.
• Experiences for handling interface work and SIMOPS with internal organization and other contractors.
• Experiences of handling system completion workflow process, system completion database of major project at many location such as fabrication yard, onshore and offshore including handover from project team to operations, interface within internal organization and familiar with system completion database ICAPS and OPERCOM.
• Experience of handling EPC contractors, sub-contractors and vendors involved in the oil and gas industry and familiar with preparation of work pack and job card for offshore HUC campaign and worldwide experience with contractors or under company.
• Excellent interpersonal and communication skills with a focus on teamwork and the ability to communicate and interact within a PMT
• Experience with preservation activities from construction warehouse to RFSU

About Airswift

Airswift is an international workforce solutions provider.  With 1000 employees and 9,000 contractors operating in over 70 countries, Airswift's geographical reach, experience and expertise across the energy, mining, infrastructure and technology sectors is unparalleled.

Position: Senior Instrumentation Engineer
Location: Perth, WA
Project: BP KRF
Indicative Term of Contract: 12 months (casual)

As a Senior Instrumentation Engineer, you will work closely the client's existing team to deliver projects while continuing to develop your skills and experience. You will start your journey on the BP KRF project as the ICSS Package Engineer to liaise and manage the completion of the Honeywell hardware and software packages. Experience with Honeywell EPKS is essential. 

Requirements:

• Engineering Qualification: Recognized degree in relevant discipline; eligibility for Engineers Australia membership.
• Control Systems Expertise: Proven delivery of significant control system design and execution projects.
• Brownfields Experience: Substantial technical experience in similar industries, particularly in multi-disciplinary projects.
• Industry Knowledge: Hydrocarbons/LNG experience highly desirable; Honeywell Experion familiarity ideal.
• Team Leadership: Strong skills in managing, coaching, and working with diverse, multi-location teams.
• Certifications (Desirable): EEHA competency and FSEng qualifications.
• Interface Management: Extensive experience with client, inter-discipline, and construction coordination.
• EPC/Consultancy Background: Must have experience in EPC companies or consultancy environments.

Only candidates with the right to work in Australia will be considered. (Australia Citizen, PR Holder, or Valid Australia working VISA)

If you are keen for this role, please apply directly to this ad with your CV & contact details, or email your CV to hassan.reza@airswift.com

• Location: Perth, WA
• The company:  Small engineering consultancy 
• Benefits: Competitive salary and evolving business 
• Indicative assignment length: This is an initial 12-month contract with strong possibility of transitioning to a permanent role

• Design and analyze structural components and systems related to processing equipment.
• Collaborate with the engineering team to ensure project specifications are met.
• Provide site support and oversight during the installation and maintenance of structural systems.
• Prepare and review technical documentation and calculations.

• Perth-based and ideally Australian citizen, permanent resident or valid working rights holder
• Proven site experience in civil/structural engineering is essential.
• Familiarity with structural processing equipment is a must.
• Previous experience in mining is preferred, particularly with gold projects, but candidates from other mineral backgrounds are welcome.
• Candidates from oil and gas industries will not be considered.

• Competitive salary package - on point with market rates 
• Supportive culture and environment 
• Flexible working hours / arrangements for ideal candidate  
• Career growth and support of national / international projects 
• Perth, WA based role - location ideal 

What you need to do now
If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. Alternatively, you may contact Tiffany via tiffany.kew@airswift.com.

Airswift is an international workforce solutions provider.  With 1000 employees and 9,000 contractors operating in over 70 countries, Airswift's geographical reach, experience and expertise across the energy, mining, infrastructure and technology sectors is unparalleled. 

By joining Airswift's community you gain exclusive access to our candidate portal 'Airswift Digital'. Frist release features include early notification of upcoming assignments via automated matching, access to our digital timesheet portal and exclusive access to content designed to support you career development. 

At Airswift, we are passionate about providing equal employment opportunities and embracing diversity to the benefit of all. We actively encourage applications from any background.

• Work activities will include project work on a well-established Master Service Agreement.
• Work activities will be executed across all phases of projects including Conceptual Studies; Basic; FEED and Detailed Design.
• Projects and proposals are for process plants and facilities across the Chemical; Petrochemical; Power and Energy Transition / New Energy sectors.
• Project work will include the development of Control & Instrument Engineering deliverables as required on a project-by-project basis.

• Experience in Instrument Engineering Design on Medium / Large capital projects from concept to start-up.
• Extensive experience in Chemical, Petrochemical and Oil & Gas industries.
• Competent in working within the C&I Discipline of a contracting organisation.
• Competent to interface with other Disciplines.
• Very good proactive communicator. The role involves liaison with Client Engineers & Project Management.
• Degree qualified for the related discipline.
• Have or work towards Chartered Engineer status as a Member of the Institute of Measurement and Control (IMC) or Institution of Engineering and Technology (IET).
• Proven ability for equipment specification and the selection and in ensuring compliance from the suppliers, preferably within an EPC contracting organization.
• Competent in project execution using selected design tools and techniques. 
• Competent in budget & Schedule control/monitoring and reporting.
• Competent in design safety, and constructability.
• To be able to work to Company standards.
• Innovative when appropriate.
• Competent in Electrical protection methodologies.
• Competent in Specification, technical bid analysis, and requisitioning of Field Instrumentation and Analysers.
• Competent in the application, specification, and requisitioning of DCS, PLC, and SIS systems, with experience in the system's full lifecycle.
• Competent in the Specification / Design / Implementation of Hazardous Area Instrumentation (ATEX).
• Competent in Instrumentation and Control requirements for Mechanical packages.
• Competent in P&ID development.
• Competent in the Sizing of flow devices/control valves/relief devices.
• Experience of working with global integrated delivery teams is preferred.